Fluctuations of exposure rate at regional radiation monitoring stations in Korea

Based on hourly means of exposure rate between August 2000 and July 2001 at nine Regional Radiation Monitoring Stations (RRMS) in Korea, we analyzed spatio-temporal characteristics of exposure rate. The mean and fluctuations of exposure rates were 99 and 3.8 nGy h(-1), respectively. The hourly exposure rate over 9 RRMS indicated a diurnal pattern with the exposure rates reaching a maximum between 5:00 and 8:00 a.m. in the early morning and a broad minimum between 4:00 and 10:00 p.m. in the afternoon. The fluctuations of exposure rate in the inland areas were less than 3.2 nGy h(-1), and those of exposure rate in coastal areas were larger than 3.9 nGy h(-1). The frequency distribution of exposure rates had one peak around the mean and was to be skewed to the right or positively skewed and its tails were fatter than those of a normal distribution. The interrelations of exposure rates at each station generally decreased with the distance between the stations. Empirical orthogonal function (EOF) analysis showed that almost all (99.9%) of exposure rate fluctuations were described by simultaneous variations. The spatial distribution of the first EOF modes of actual, low-pass (periods longer than one month) and high-pass (periods shorter than one month) exposure rate series were similar to each other.     

Abundance and sources of hydrophilic and hydrophobic water-soluble organic carbon at an urban site in Korea in summer

In this study, the characteristics of total water-soluble organic carbon (WSOC) and isolated WSOC fractions were examined to gain a better understanding of the pathway of organic aerosol production. 24 h PM(2.5) samples were collected during the summer (July 28-August 28, 2009) at an urban site in Korea. A glass column filled with XAD7HP resin was used to separate the filtered extracts into hydrophilic (WSOC(HPI)) and hydrophobic (WSOC(HPO)) fractions. The origins of air mass pathways arriving at the sampling site were mostly classified into three types, those originating over the East Sea of Korea that passed over the eastern inland urban and industrial regions (type I); those from the marine (western/southwestern/southern marine) and passed over the national industrial complex regions (type II); and those from northeastern China that passed through North Korea and metropolitan areas of South Korea (type III). Measurements showed an increase in the average WSOC fraction of total OC from the type II to III air mass (53 to 64%) periods. Also, higher SO(4)(2-)/SO(x) (=SO(2) + SO(4)(2-)) was observed in the type III air mass (0.70) than those in the types I (0.49) and II (0.43). According to the average values of WSOC/OC and SO(4)(2-)/SO(x), measurements suggest that the aerosols collected during the type III air mass period were more aged or photo-chemically processed than those during the types I and II air mass periods. The relationship between the SO(4)(2-)/SO(x) and WSOC/OC (R(2) = 0.64) suggests that a significant fraction of the observed WSOC at the site could be formed by an oxidation process similar to SO(4)(2-) aerosols, probably the oxidation process using OH radicals, or in-cloud processing. The photochemical production of WSOC(HPO) was also observed to significantly contribute to the total OC.     

A validated 2-D diffusion–advection model for prediction of drift from ground boom sprayers

Correct field drift prediction is a key element in environmental risk assessment of spraying applications. A reduced order drift prediction model based on the diffusion–advection equation is presented. It allows fast assessment of the drift potential of specific ground boom applications under specific environmental wind conditions that obey the logarithmic wind profile. The model was calibrated based on simulations with a validated Computational Fluid Dynamics (CFD) model. Validation of both models against 38 carefully conducted field experiments is successfully performed for distances up to 20 m from the field edge, for spraying on flat pasture land. The reduced order model succeeded in correct drift predictions for different nozzle types, wind velocities, boom heights and spray pressures. It used 4 parameters representing the physical aspects of the drift cloud; the height of the cloud at the field edge, the mass flux crossing the field edge, the settling velocity of the droplets and the turbulence. For the parameter set and range considered, it is demonstrated for the first time that the effect of the droplet diameter distribution of the different nozzle types on the amount of deposition spray drift can be evaluated by a single parameter, i.e., the volume fraction of droplets with a diameter smaller than 191 μm. The reduced order model can be solved more than 4 orders of magnitude faster than the comprehensive CFD model.     

Stabilization and solidification of elemental mercury for safe disposal and/or long-term storage

A simple and highly effective stabilization/solidification (S/S) technology of elemental mercury using only sulfur with paraffin is introduced. First, elemental mercury is mixed with an excess of sulfur powder and heated to 60 degrees C for 30 min until elemental mercury is converted into mercuric sulfide (HgS black, metacinnabar) (Step 1). Then, metacinnabar with additional sulfur is poured into liquid paraffin (Step 2). Finally, the mixture is melted at 140 degrees C and settles to the bottom of the vessel where it cools and solidifies under the layer of liquid paraffin (Step 3). The proposed S/S method with sodium sulfide nonahydrate (Na2S x 9H2O) as an additive is also tested for comparison. The average toxicity characteristic leaching procedure test values are 6.72 microg/L (no additive) and 3.18 microg/L (with additive). Theses concentrations are well below the Universal Treatment Standard (25 microg/L). Effective diffusion coefficient evaluated from accelerated leach test and average headspace concentration of Hg vapor after 18 hr are 3.62 x 10(-15) cm2/sec, 0.55 mg/m3 (no additive) and 5.86 x 10(-13) cm2/sec, 0.25 mg/m3 (with additive).     

Characterization of heat shock protein 40 and 90 in Chironomus riparius larvae: effects of di(2-ethylhexyl) phthalate exposure on gene expressions and mouthpart deformities

Di(2-ethylhexyl) phthalate (DEHP) is a widely distributed phthalate that organisms are frequently exposed to due to its wide range of commercial and manufacturing uses as a plasticizer. Indeed, DEHP is often found in freshwater systems that receive domestic waste water discharges. Therefore, we evaluated the effects of DEHP on the mRNA levels of heat shock protein (HSP) 40 and 90 in chironomids. In addition, we evaluated the effects of exposure to DEHP on the induction of morphological deformities in chironomids. To accomplish this, partial sequences of HSP 40 and 90 from Chironomus riparius larvae were amplified and sequenced. The inferred amino acid sequences were then aligned with those of other insect HSP 40 and 90 genes. The results of this alignment revealed that there was a high degree of similarity among the homologues. In addition, the HSP 40 and 90 mRNA expressions were significantly upregulated in response to short and long-term exposure to DEHP at concentrations of 1, 10, and 30 microgL(-1). Furthermore, the occurrence of mouthpart deformities was significantly higher in chironomids that were treated with DEHP (12-20%) than in controls (3-5%). Taken together, these results indicate that HSP 40 and 90 play important roles in the physiological changes related to metabolism and cell protection that occur in C. riparius larvae that have been exposed to DEHP.     

Regeneration of iron for trichloroethylene reduction by Shewanella alga BrY

Zero valent iron (ZVI), the primary reactive material in several permeable reactive barriers, is often oxidized to ferrous or ferric iron, resulting in decreased reactivity with time. Iron reducing bacteria can reconvert the ferric iron to its ferrous form, prolonging the reduction of chlorinated organic contaminants. In this study, the reduction of Fe(II,III) oxide and Fe(III) oxide by a strain of iron reducing bacteria of the group Shewanella alga BrY(S. alga BrY) was observed in both aqueous and solid phases. S. alga BrY preferentially reduced dissolved ferric iron over the solid ferric iron. In the presence of iron oxide the Fe(II) ions reduced by S. alga BrY efficiently reduced trichloroethylene (TCE). On the other hand, Fe(II) produced by S. alga BrY covered the reactive surfaces of ZVI iron filings and inhibited the reduction of TCE by ZVI. The formation of precipitates on the iron oxide or Fe0 surface was confirmed by scanning electron microscopy. The results suggest that iron-reducing bacteria in the oxidized Fe0 barriers can enhance the removal rate of chlorinated organic compounds and influence on the long-term performance of Fe0 reactive barriers.     

Degradation rates of CFC-11, CFC-12 and CFC-113 in anoxic shallow aquifers of Araihazar, Bangladesh

Chlorofluorocarbons CFC-11 (CCl(3)F), CFC-12 (CCl(2)F(2)), and CFC-113 (CCl(2)F-CClF(2)) are used in hydrology as transient tracers under the assumption of conservative behavior in the unsaturated and saturated soil zones. However, laboratory and field studies have shown that these compounds are not stable under anaerobic conditions. To determine the degradation rates of CFCs in a tropical environment, atmospheric air, unsaturated zone soil gas, and anoxic groundwater samples were collected in Araihazar upazila, Bangladesh. Observed CFC concentrations in both soil gas and groundwater were significantly below those expected from atmospheric levels. The CFC deficits in the unsaturated zone can be explained by gas exchange with groundwater undersaturated in CFCs. The CFC deficits observed in (3)H/(3)He dated groundwater were used to estimate degradation rates in the saturated zone. The results show that CFCs are degraded to the point where practically no (<5%) CFC-11, CFC-12, or CFC-113 remains in groundwater with (3)H/(3)He ages above 10 yr. In groundwater sampled at our site CFC-11 and CFC-12 appear to degrade at similar rates with estimated degradation rates ranging from approximately 0.25 yr(-1) to approximately 6 yr(-1). Degradation rates increased as a function of reducing conditions. This indicates that CFC dating of groundwater in regions of humid tropical climate has to be carried out with great caution.     

Remediation of petroleum-contaminated soils by fluidized thermal desorption

A novel type of fluidized bed desorber was developed for the remediation of petroleum-contaminated soils at low temperature with high efficiency. Cahn balance® was utilized to investigate the thermal desorption behavior of soils contaminated by various hydrocarbons. The performance of the fluidized-bed desorber was investigated at different operating modes. Batch operation of the fluidized-bed desorber exhibited 99.9% desorption efficiency at temperatures of ca. 300°C within a half hour. Continuous operation of the fluidized-bed indicated that Q/F (the ratio of the mass flow rate of fluidizing gas to feeding rate of contaminated soils) is less important at higher temperature (>300°C), if proper fluidization is ensured. The periodic operation of the fluidized bed desorber shows the possibility to reduce off-gas volume significantly.     

Reliable evidences that the removal mechanism of hexavalent chromium by natural biomaterials is adsorption-coupled reduction

For the last few decades, over 200 papers have been published in the Cr(VI) biosorption research field. Most early studies have claimed that Cr(VI) was removed from aqueous phase through an anionic adsorption, but this approach has been lost old original position. It has been newly explained that these findings were misinterpreted due to errors in measuring the concentrations of different chromium species in the aqueous phase, insufficient contact time required for equilibrium and the lack of information about the oxidation state of the chromium bound to biomaterials. Although 'adsorption-coupled reduction' is now widely accepted as the mechanism of Cr(VI) biosorption by natural biomaterials, a number of researchers still believe that Cr(VI) is removed by anionic adsorption onto the biomaterials. Therefore, the objective of this study was to show reliable evidences that the removal mechanism of Cr(VI) by natural biomaterials is 'adsorption-coupled reduction'. Sixteen natural biomaterials were used to study the Cr(VI) biosorption. Not only Cr(VI) but also total Cr in the aqueous phase were analyzed. X-ray photoelectron spectroscope was also used to verify the oxidation state of the chromium bound to the biomaterials. Finally, the removal behavior of Cr(VI) by each biomaterial was described by a kinetic model based on a redox reaction.     

Changes in thyroid peroxidase activity in response to various chemicals

Thyroperoxidase (TPO) is a large heme-containing glycoprotein that catalyzes the transfer of iodine to thyroglobulin during thyroid hormone (TH) synthesis. Previously, we established an in vitro assay for TPO activity based on human recombinant TPO (hrTPO) stably transfected into human follicular thyroid carcinoma (FTC-238) cells. It is important to determine whether environmental chemicals can disrupt TPO activity because it is an important factor in the TH axis. In this study, we used our assay to examine the changes in TPO activity in response to various chemicals, including benzophenones (BPs), polycyclic aromatic hydrocarbons (PAHs), and persistent organic pollutants (POPs). Overall, BPs, PAHs, and POPs slightly altered TPO activity at low doses, as compared with the positive controls methimazole (MMI), genistein, and 2,2',4,4'-tetrahydroxy BP. Benzophenone, benzhydrol, 3-methylchloranthracene, pyrene, benzo(k)fluoranthene, benzo(e)pyrene, perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and heptachlor decreased TPO activity, while 2,4-dihydroxy BP, 2,2'-dihydroxy-4-methoxy BP, and dibenzo(a,h)anthracene increased TPO activity. From these data, we can predict the disruption of TPO activity by various chemicals as a sensitive TH end point. TPO activity should be considered when enacting measures to regulate environmental exposure to thyroid-disrupting chemicals.